Skip to main content
Ultrasonic Clamp-On Flow Meters

25-115mm U1000MKII-WM-HM Wall Mount Ultrasonic Clamp-On Energy Meter

Clamp-on ultrasonic energy meter for water and glycol circuits with a separate wall-mounted keypad and display.

Part no.904-200014xx

  • Supplied and supported by GTi in Thailand
  • Calibration certificate on delivery
  • Selection, installation and commissioning help

Overview

Supplied with PT100 temperature sensors; heat energy is calculated to EN1434 section 6.

  • Up to 4” pipe size – 25-115mm OD / 20-110mm ID
  • Electronic transmitter – LCD with backlight
  • Enclosure rating IP 68
  • Comes with PT100 temperature sensors
  • 5 metre transducer cables
  • Heat/Energy calculation is designed to comply with EN1434 section 6
  • Includes pulse output (optional 4-20mA, Modbus and M-Bus outputs can be selected)

Specifications

Wall Mounted Keypad and Display Dimensions
215mm x 125mm x 90mm
External Power Supply
12V – 24V ±10% AC/DC at 7 watts per unit. Optional plug in 12V power supply
Modbus Communication
Optional Modbus RTU slave, RS485 serial link hardware layer. Energy, power, temperature and flow
Mbus Communication
Optional
Temp range
-0°C to +135°C
Turn Down Ratio
100:1
Accuracy
±1% – 3% of flow reading for velocity rate >0.3m/s (>1 ft/s)

Videos

Product walk-throughs, installation and set-up from the manufacturer.

The New U1000MKII ULTRAFLO Range of Clamp-on Flow & Energy Meters

Documents & Downloads

Manuals, data sheets and approvals from the manufacturer. Ask us if you need a document that is not listed.

Not Sure Which Instrument Fits?

Tell us what you need to measure and where. Our engineers match the instrument, supply it with a calibration certificate and help commission it on site.