Skip to main content
Ultrasonic Clamp-On Flow Meters

13-115mm UF3300-FM Fixed Ultrasonic Clamp-On Flow Meter

Fixed clamp-on ultrasonic flow meter for water and glycol, mounted on the outside of the pipe.

Part no.910-1x00Axxx

  • Supplied and supported by GTi in Thailand
  • Calibration certificate on delivery
  • Selection, installation and commissioning help

Overview

Transit-time sensing gives flow rate and total with a pulse output, with no pipe cutting and no pressure loss. The pipe range is shown in the product name.

  • With ‘A’ type transducers (13-115mm OD)
  • New cross correlation flow measurement system
  • 64 x 240 pixels display
  • Optional 100 million point data logger and RS232/USB outputs
  • Flow Range – 0.1m/sec to 20m/sec bi-directional
  • Set-up via 15 key control panel
  • CE approved

Specifications

Transducer Operating Temp
-20°C to +135°C with High Temp option
Sensor cables, blocks and temp sensors
IP54 with IP68 option
Power
86V to 264V AC. Optional 24V a.c./d.c. 1A max

Documents & Downloads

Manuals, data sheets and approvals from the manufacturer. Ask us if you need a document that is not listed.

Not Sure Which Instrument Fits?

Tell us what you need to measure and where. Our engineers match the instrument, supply it with a calibration certificate and help commission it on site.