Water Flow Meters
1” GMDM-I Multi Jet Cold Water Meter, Q3 = 6.3
WRAS and MID approved multi-jet cold water meter with a dry dial and magnetic drive, rated to 50 °C.
Details
Brand
1 / 7Differential Pressure Flow Meters
V-Cone Differential Pressure Flow Meter
Differential pressure flow meter with a cone element, ±0.5 % of rate, needing very little straight pipe.
- Supplied and supported by GTi in Thailand
- Calibration certificate on delivery
- Selection, installation and commissioning help
Overview
Widely used in oil and gas.
Specifications
- Accuracy
- ±0.5% of flow rate.
- Repeatability
- ±0.1% for consistent performance.
- Flow Range
- Wide operating range with high turndown ratio.
- Flow Conditioning
- Built-in design stabilises disturbed or swirling flows.
- Installation
- Requires minimal straight pipe runs.
- Efficiency
- Low head loss and low maintenance requirements.
- Calibration
- No routine recalibration needed.
- Compliance
- Suitable for use in ATEX-certified hazardous environments.
Videos
Product walk-throughs, installation and set-up from the manufacturer.
Documents & Downloads
Manuals, data sheets and approvals from the manufacturer. Ask us if you need a document that is not listed.
Manuals & Guides 6
- V-Cone Application GuidePDF · from the manufacturer
- EA402-10 Flow Computer Ratemeter Totalizer IOM ManualPDF · from the manufacturer
- EA403 Installation & Operating InstructionPDF · from the manufacturer
- Model EA275-00 Mass Flow Computer IOM ManualPDF · from the manufacturer
- V-Cone IOM ManualPDF · from the manufacturer
- V-Cone Troubleshooting GuidePDF · from the manufacturer
Data Sheets 12
- 24509-29r23 VB Beveled End Specification SheetPDF · from the manufacturer
- 24509-30r22 VP Plain Ends Specification SheetPDF · from the manufacturer
- 24509-34r22 VSX ANSI B16.1 Slip-On, RF Flanges-Class 125 or 250 Specification SheetPDF · from the manufacturer
- EA402-10 Flow Computer Data SheetPDF · from the manufacturer
- EA403 Flow Computer Data SheetPDF · from the manufacturer
- VC DIN Slip-On, Flat Face Flanges Specification SheetPDF · from the manufacturer
Brochures & Application Notes 6
- Flow Measurement Solutions for Power Generation Sales BrochurePDF · from the manufacturer
- Flow Meters for HVAC Brochure 30125-71r11PDF · from the manufacturer
- Flow Meters for Industrial Application Brochure 30125-79r11PDF · from the manufacturer
- Municipal Flow Metering Sales BrochurePDF · from the manufacturer
- V-Cone FPSO Sales FlyerPDF · from the manufacturer
- V-Cone O&G Sales FlyerPDF · from the manufacturer
Water Flow Meters
1” GMDM-I Multi Jet Hot Water Meter, Q3 = 6.3
WRAS and MID approved multi-jet hot water meter with a dry dial and magnetic drive, rated to 90 °C.
Details
Water Flow Meters
1¼” GMDM-I Multi Jet Cold Water Meter, Q3 = 10
WRAS and MID approved multi-jet cold water meter with a dry dial and magnetic drive, rated to 50 °C.
Details
Water Flow Meters
1¼” GMDM-I Multi Jet Hot Water Meter, Q3 = 10
WRAS and MID approved multi-jet hot water meter with a dry dial and magnetic drive, rated to 90 °C.
Details
Not Sure Which Instrument Fits?
Tell us what you need to measure and where. Our engineers match the instrument, supply it with a calibration certificate and help commission it on site.