Humidity / Temperature Transmitters
110mm 160W/HP Wall Mount Humidity Transmitter, 3% Acc
Wall-mount relative humidity transmitter with a 110 mm plug-in digital sensor and one 4-20 mA output.
Details
Brand
1 / 4Humidity / Temperature Transmitters
Schischek RedBin-D Explosion Proof Thermostat / Hygrostat
Explosion-proof thermostat / hygrostat for Zone 2 and 22, with separate temperature and humidity switch points.
- Supplied and supported by GTi in Thailand
- Calibration certificate on delivery
- Selection, installation and commissioning help
Overview
- ATEX approved for use in zone 2 (gas) and 22 (dust) hazardous areas
- Temperature and / or humidity measurement
- Switch-point for °C and %rH separately adjustable
- 1-channel (2 potential free contacts) or 2-channel (4 potential free contacts) versions available
- Room / duct mount types available
- 24 VAC / DC power
- No intrinsically safe install / wiring required between panel and sensor
- Switching status display with LED
- Ambient temperatures as low as -20°C
- Very compact with robust aluminium housing
- IP66 protection
Documents & Downloads
Manuals, data sheets and approvals from the manufacturer. Ask us if you need a document that is not listed.
Certificates & Approvals 2
More Documents 5
- Redbin den pdf RTKIMPORTASSETFIWC0NPDF · from the manufacturer
- Euc REDBIN2025REV.08MULTI pdf UHLSPVBVQ6QIZH9SFH02HWPDF · from the manufacturer
- Euc REDBIN2025REV.08GERMAN PDF-3BKBZDMASPOJSLMDFH9TWPDF · from the manufacturer
- Euc REDBIN2025REV.08FRENCH pdf INLUC8XVTKC8BAU7RYNVGPDF · from the manufacturer
- Euc redbin pdf rtkimportassetxkkjppPDF · from the manufacturer
Humidity / Temperature Transmitters
110mm 162W/HP Wall Mount Humidity / Temperature Transmitter, 2% Acc
Wall-mount humidity and temperature transmitter with a 110 mm interchangeable sensor and two 4-20 mA outputs.
Details
Humidity / Temperature Transmitters
250mm 160D/HP02 Duct Mount Humidity / Temperature Transmitter, 3% Acc
Duct-mount humidity and temperature transmitter with a 250 mm probe and two 4-20 mA outputs.
Details
Humidity / Temperature Transmitters
250mm 162D/HP02 Duct Mount Humidity / Temperature Transmitter, 2% Acc
Duct-mount humidity and temperature transmitter with a 250 mm probe and two 4-20 mA outputs.
Details
Not Sure Which Instrument Fits?
Tell us what you need to measure and where. Our engineers match the instrument, supply it with a calibration certificate and help commission it on site.