Humidity / Temperature Transmitters
110mm 160W/HP Wall Mount Humidity Transmitter, 3% Acc
Wall-mount relative humidity transmitter with a 110 mm plug-in digital sensor and one 4-20 mA output.
Details
Brand
1 / 3Humidity / Temperature Transmitters
Schischek InBin-D Thermostat / Hygrostat
Industrial thermostat / hygrostat for safe areas, IP66, with separate temperature and humidity switch points.
- Supplied and supported by GTi in Thailand
- Calibration certificate on delivery
- Selection, installation and commissioning help
Overview
- Industrial thermostat / hygrostat transmitter and sensor for use in safe area
- Temperature and / or humidity measurement
- Switch-point for °C and %rH separately adjustable
- 1-channel (2 potential free contacts) or 2-channel (4 potential free contacts) versions available
- Room / duct mount types available
- 24 VAC / DC power
- No intrinsically safe install / wiring required between panel and sensor
- Switching status display with LED
- Ambient temperatures as low as -20°C
- Very compact with robust aluminium housing
- IP66 protection
Documents & Downloads
Manuals, data sheets and approvals from the manufacturer. Ask us if you need a document that is not listed.
More Documents 5
- Inbin den pdf RTKIMPORTASSETFSXGU8PDF · from the manufacturer
- Euc INBIN2025REV.06MULTI pdf WWPZKEETNMOP3KN2C934GPDF · from the manufacturer
- Euc INBIN2025REV.06GERMAN pdf ZEJSC5YCTGAYCGM0DNUVZQPDF · from the manufacturer
- Euc INBIN2025REV.06FRENCH PDF-7TC6WJVFQTMLBTFHKRDJ1GPDF · from the manufacturer
- Euc inbin pdf rtkimportassetogxptgPDF · from the manufacturer
Humidity / Temperature Transmitters
110mm 162W/HP Wall Mount Humidity / Temperature Transmitter, 2% Acc
Wall-mount humidity and temperature transmitter with a 110 mm interchangeable sensor and two 4-20 mA outputs.
Details
Humidity / Temperature Transmitters
250mm 160D/HP02 Duct Mount Humidity / Temperature Transmitter, 3% Acc
Duct-mount humidity and temperature transmitter with a 250 mm probe and two 4-20 mA outputs.
Details
Humidity / Temperature Transmitters
250mm 162D/HP02 Duct Mount Humidity / Temperature Transmitter, 2% Acc
Duct-mount humidity and temperature transmitter with a 250 mm probe and two 4-20 mA outputs.
Details
Not Sure Which Instrument Fits?
Tell us what you need to measure and where. Our engineers match the instrument, supply it with a calibration certificate and help commission it on site.