Humidity / Temperature Transmitters
110mm 160W/HP Wall Mount Humidity Transmitter, 3% Acc
Wall-mount relative humidity transmitter with a 110 mm plug-in digital sensor and one 4-20 mA output.
Details
Brand
1 / 4Humidity / Temperature Transmitters
Schischek ExCos-D Explosion Proof Temperature / Humidity Transmitter
Explosion-proof temperature and humidity transmitter for Zone 1, 2, 21 and 22, room or duct mount.
- Supplied and supported by GTi in Thailand
- Calibration certificate on delivery
- Selection, installation and commissioning help
Overview
No intrinsically safe wiring needed between panel and sensor.
- ATEX and IECEx approved for use in zone 1, 2 (gas) and zone 21, 22 (dust) hazardous areas
- Temperature and / or humidity measurement
- Room / duct mount types available
- No intrinsically safe install / wiring required between panel and sensor
- Backlit display (which can be switched off)
- Ambient temperatures as low as -20°C
- Very compact with robust aluminium housing / standard coating
- IP66 protection
Documents & Downloads
Manuals, data sheets and approvals from the manufacturer. Ask us if you need a document that is not listed.
Data Sheets 1
Certificates & Approvals 3
More Documents 5
- Pub113-002-00-1222-pdf rtkimportassetb97665PDF · from the manufacturer
- Euc EXCOS2025-REV7MULTI pdf GD6GE460RYB0R0VDAGHBAPDF · from the manufacturer
- Euc EXCOS2025-REV7GERMAN pdf WQUOQGSWSDGL08R0RKSIGPDF · from the manufacturer
- Euc EXCOS2025-REV7FRENCH pdf T1GLU1XORECCQ7E1EOPTWAPDF · from the manufacturer
- Euc excos pdf RTKIMPORTASSETB2VAO7PDF · from the manufacturer
Humidity / Temperature Transmitters
110mm 162W/HP Wall Mount Humidity / Temperature Transmitter, 2% Acc
Wall-mount humidity and temperature transmitter with a 110 mm interchangeable sensor and two 4-20 mA outputs.
Details
Humidity / Temperature Transmitters
250mm 160D/HP02 Duct Mount Humidity / Temperature Transmitter, 3% Acc
Duct-mount humidity and temperature transmitter with a 250 mm probe and two 4-20 mA outputs.
Details
Humidity / Temperature Transmitters
250mm 162D/HP02 Duct Mount Humidity / Temperature Transmitter, 2% Acc
Duct-mount humidity and temperature transmitter with a 250 mm probe and two 4-20 mA outputs.
Details
Not Sure Which Instrument Fits?
Tell us what you need to measure and where. Our engineers match the instrument, supply it with a calibration certificate and help commission it on site.