Insertion Probes
Vane wheel probe FT25
Cylindrical vane wheel sensor / insertion probe with integrated temperature sensor Pt100 for combined measurement flow/temperature and probe diameter 25 mm.
Details
Brand
Insertion Probes
Vane wheel probe ZS30 ZG4
Cylindrical vane wheel sensor / insertion probe with probe diameter 30 mm and integrated transducer UFA (optional).
- Supplied and supported by GTi in Thailand
- Calibration certificate on delivery
- Selection, installation and commissioning help
Overview
Probe material: stainless steel.
Working temperature range up to +350 °C.
Suitable for fixed measuring of actual flow velocity v [m/s] and flow rate V/t [m³/h, l/min] in clean gases and liquids, briefly also in particle-laden mediums. The low starting value of only 0.3 m/s has proved advantageous.
Signal evaluation with integrated transducer UFA (optional), handheld flowtherm NT.2 or flowtherm Ex, separate transducer UFA or system units.
Specifications
- Measuring range
- 0.3 ... 3 m/s in gases / 0.03 ... 3 m/s in liquids
- Pressure resistance
- up to 6 bar / 600 kPa overpressure
- Media temperature
- -40 ... +350 °C
- Media
- gases / liquids
- Displayed indicators
- flow velocity, flow rate, volume
- IP protection type
- IP65 (connection housing)
- Type of protection
- with UFA: ATEX category 3G and 3D (zone 2 and 22), (optional) / without UFA: ATEX category 2G (zone 1), (optional)
- Sensor output
- analog output 4-20 mA / limit value / quantity pulse / RS232 (only with integrated transducer UFA)
Documents & Downloads
Manuals, data sheets and approvals from the manufacturer. Ask us if you need a document that is not listed.
Insertion Probes
Vane wheel probe TS 90/80 Macro
TS 90/80 macro probes are able to measure air flows already from 0.15 m/s. Compared to cylindrical probes ZS, the TS probes offer a significantly lower sensitivity to indirect oncoming flow, so that they can be used when the direction of flow is not known.
Details
Insertion Probes
Vane wheel probe ZS16 ZG1ZG2
Cylindrical vane wheel sensor / insertion probe with probe diameter 16 mm for applications in pipes with small inside diameters or for insertion in small holes.
Details
Insertion Probes
Vane wheel probe ZS25 ZG1
Cylindrical vane wheel sensor / insertion probe with probe diameter 25 mm.
Details
Not Sure Which Instrument Fits?
Tell us what you need to measure and where. Our engineers match the instrument, supply it with a calibration certificate and help commission it on site.