Insertion Probes
Vane wheel probe FT25
Cylindrical vane wheel sensor / insertion probe with integrated temperature sensor Pt100 for combined measurement flow/temperature and probe diameter 25 mm.
Details
Brand
Insertion Probes
Vane wheel probe ZS2527 ZG2
Cylindrical vane wheel sensor / insertion probe with probe diameter 25/27 mm for applications at high working temperatures also in conjunction with high pressures.
- Supplied and supported by GTi in Thailand
- Calibration certificate on delivery
- Selection, installation and commissioning help
Overview
Probe material: stainless steel.
Working temperature range up to +550 °C.
Suitable for fixed and portable measuring of actual flow velocity v [m/s] and flow rate V/t [m³/h, l/min] in clean gases and liquids, briefly also in particle-laden mediums. They are extendable and therefore practical for applications in smoke stacks, etc.
Signal evaluation with flowtherm NT.2, flowtherm Ex, transducer UFA and system units.
Specifications
- Measuring range
- 0.4 ... 120 m/s in air/gases / 0.04 ... 10 m/s in liquids
- Pressure resistance
- up to 6 bar / 600 kPa overpressure
- Media temperature
- -40 ... +550 °C
- Media
- gases / liquids
- IP protection type
- IP20 (cable side)
- Type of protection
- ATEX category 2G (zone 1), (optional)
- Sensor output
- v/FA
Documents & Downloads
Manuals, data sheets and approvals from the manufacturer. Ask us if you need a document that is not listed.
Insertion Probes
Vane wheel probe TS 90/80 Macro
TS 90/80 macro probes are able to measure air flows already from 0.15 m/s. Compared to cylindrical probes ZS, the TS probes offer a significantly lower sensitivity to indirect oncoming flow, so that they can be used when the direction of flow is not known.
Details
Insertion Probes
Vane wheel probe ZS16 ZG1ZG2
Cylindrical vane wheel sensor / insertion probe with probe diameter 16 mm for applications in pipes with small inside diameters or for insertion in small holes.
Details
Insertion Probes
Vane wheel probe ZS25 ZG1
Cylindrical vane wheel sensor / insertion probe with probe diameter 25 mm.
Details
Not Sure Which Instrument Fits?
Tell us what you need to measure and where. Our engineers match the instrument, supply it with a calibration certificate and help commission it on site.